Kwik-Sew 3616

As promised, here’s a quick review of the alterations I made to this pattern. After cutting out a test upper bodice, I determined that I’d need about 3/4″ in additional length over the bust in order for the seam to ride under my bra. Heaven forbid, as Heidi Klum says, that the boobs aren’t in the right place! Since the upper bodice is very loose fitting (and has gathers under the bust and at the shoulder) I didn’t require any additional width. I simply marked the additional length on the pattern and used my French curve to draw a smooth line.


Neckline gaposis is often a problem on fuller-busted figures and is really easy to fix. I discussed this alteration HERE a few years ago (hit your browser back button to return here). The objective is to shorten the facing and ease the extra fabric of the neckline to it. I did a down-and-dirty job of it here. Unlike my previous tutorial, the outer edge of this facing is not sewn to anything else so I just tapered to nothing at the cut edge.


This does change the shape of the facing from a straight on-grain piece to a curved piece as you can see upon comparing the altered piece with the original.


What about the grainline, you ask? I changed the grainline to the center front. Cutting a straight facing on-grain serves to stabilize the neck edge. Once the facing becomes curved that is no longer possible. The facings are interfaced and the neck edges eased to it so stretching really isn’t an issue, in my opinion. If you wanted to use straight tape I guess you could but I don’t think it’s necessary and would just add bulk.


Some of you may remember this fabric that Ann sent me last summer. It’s the Boho Chic Jersey in a different colorway.


If you’re new here, this was the must-have fabric of 2008! I used it for this dress (the Hot Patterns Cosmopolitan Dress):


I thought it would be perfect for Kwik-Sew 3616 and you know how much I love to play around with patterns! I think the most important thing to do when working with a panel print is to plan carefully and never, ever overcut – you don’t want to cut into an adjacent panel or border that you might need later. This means your yardage will resemble Swiss cheese when you are done. 🙂 As I cut out the sections I lay them on the floor so that I can get a better idea how it’s all going to fit together. I actually cut the lower bodice so that the border would wind up in the hem – I wanted as little white directly on my stomach as possible.


I decided to seam the center back since it was too wide to fit into one panel. I would have liked a smoother transition over the shoulder but there just wasn’t any way to work that out due to the size of the pattern pieces.


Once I’m finished sewing this version I think I’ll transfer the paper pattern to manila so that I have a nice, sturdy permanent pattern. This one’s a keeper.


Filed under Alterations, Fabric, Hot Patterns, Kwik-Sew

7 responses to “Kwik-Sew 3616

  1. That top is going to be stunning! I love it. Great job with the print placement. Wow!

  2. That is going to be great! I have 4 yards of this fabric in the same colorway in my personal stash, and I’m debating what to make with it, but it’s on my next to sew list.

  3. I jus thought this would be adorable with white pants or shorts.

  4. That’s going to be fabulous! I love that print!

  5. This is going to be fabulous. You are really great at laying out a big design like this to flatter your figure.

  6. Nice job matching that print. Very pretty.

  7. meg

    I love this, the print is gorgeous.