Jalie 2320 Gray trucker jacket – Final

Wow, I feel like this jacket went together so quickly. I’m usually such a slow sewer as I just like to relax and enjoy the entire process and not just rush through to the finish line. It’s always nice when a project turns out exactly as you envisioned. Actually, it turned out better because I never dreamed that I’d really be able to make that metallic organza behave! Yes, I made a few mistakes along the way but that is to be expected when one is a bit out of practice. Okay, maybe a lot out of practice!

Moving onto the back, I assembled the back panels, attached the back yoke and bound the seams for a little extra flash. (The front seams are mostly covered by the pocket bags so I opted for the flatter mock flat fell seams there instead)

Next I joined the front and back at the shoulder seam and attached the collar. I apologize, I somehow neglected to show the steps for finishing the front facings and the neck edge but it’s very straightforward.

The sleeve vents are pretty standard for this type of jacket. The upper and under sleeves are stitched together in a conventional seam to the dot/marking and the seam is pressed flat, then open.

Then, the undersleeve seam is clipped to the seam allowance, turned under twice and topstitched.

Next, the upper sleeve seam allowances are turned under in a mock flat felled seam, being careful not to catch the underlap. The last step is to make a bar tack – or two – to secure the small bit of raw edge at the top of the underlap. Sometimes, I will substitute a rivet but I didn’t think I needed more metal in this jacket.

Once the sleeves were set in, I bound the armscye. I did have a little trouble here and had to recut my binding yet another 1/8″ wider before it would cleanly bind the seam. I’m very happy with the way it looks.

Next, I reduced the under cuff seam allowance and bound the edge before stitching the outer cuff to the outside of the sleeve. I used a heavier interfacing on the outer cuff and a lighter one on the inner cuff. I would ordinarily use the lighter interfacing on the entire cuff but I seem to be low on the lighter weight, which is my favorite.

I stitched the ends, folding under the bound edge as gracefully as possible.

Once again, instead of clipping across the corners, I folded the seam allowances over each other and held them together as I turned the cuff right side out. This results in a good square corner that isn’t weak at the point.

The cuff is then closed up by stitching in the well of the seam from the right side and topstitching all around.

The waistband is attached in the same manner.

After making the remaining buttonholes, my favorite part: sewing the buttons on by hand and hanging it in my closet!

The inside is my favorite!

Sources: Irish linen and Cartier-inspired buttons from the (sadly) long-gone Maggi’s for Fine Fabrics in Boca Raton; Kona cotton pocketing and metallic organza from JoAnn Fabrics; fusible interfacings from my friend Pam at http://www.fashionsewingsupply.com.

Next, I thought I’d be starting on my shameless copy of Ann’s fabulous cloque bomber jacket http://www.facebook.com/GorgeousFabricscom/photos/a.10156993718053169./10157206259223169 but realized that I didn’t have just the right zipper in my stash so, while I’m waiting on that, I have another project I’ll be starting on. Stay tuned!

Parting shot: I am so in love with this Gucci bomber jacket. I have been searching all of my favorite online fabric vendors for just the right fabric and, unfortunately, I didn’t find anything suitable with a black background. But, I did find something really fabulous with a white background so this will be going in the queue!


Filed under Jackets, Jalie Patterns

8 responses to “Jalie 2320 Gray trucker jacket – Final

  1. Lorna C Newman

    Stunning workmanship, as always, Gigi!

    • Nancy Crome

      I’m late in actually viewing this thread … and am only now seeing the finished jacket. I had to jostle my sewing mind awake before realizing that the the fabulous bound mock seams were on the INSIDE of the jacket. I knew I’d been saving Gigi’s threads for a reason. What perfection to aspire to!

  2. Gorgeous! I’m very glad you’re posting again.

  3. Laurie Hertzlin Wade

    Gigi, this is incredible workmanship. You are a master at your work.

  4. Vicki Maiorano

    Wow, it turned out fabulous. Love the fun buttons and the organza binding. Wish it was hanging in my closet 🙂

  5. Renita

    To one of the Sewing Divas: Gorgeous jacket. It is so nice to see your carefully thought-out techniques and so well documented!!! Thank you and I have missed you all these years!!