Tag Archives: Jalie

Jalie 2320 Gray trucker jacket – Part III

Before attaching the front yoke, buttonholes must be made in the pocket flaps. My beloved 1961 Singer Rocketeer was a birthday gift from my friend Greg 10 or 11 years ago. I keep her set up for buttonholes at all times because I find her buttonholes far superior to those of any of my other machines, including my Berninas.

Next, I played around with the binding. My metallic organza has a scratchy metallic face but is smooth on the backside so I decided to use the backside as my right side. It took a few test runs to get it just right.

I started with a 1 1/4” binding plate and cut my bias strip 1 1/4” wide (far right) and ended up with a lot of threads poking out. Next, I cut my bias strip to 1 3/8” (center) and that worked out perfectly but I thought it looked too wide and heavy.

I then switched to a 1” binding plate and cut my bias strip 1 1/8” wide (left) and that gave me the look I wanted.

Here’s a quick video of the binding operation. I keep this industrial single-needle machine set up for binding all the time. Sorry, I was filming with one hand and guiding the fabric with the other but you get the idea.

The finished bound pocket.

Now, it’s time to attach the pocket flaps and the front yoke.

I find the front yoke seam too bulky to run through the binder so I prefer to use a Hong Kong finish here instead.

Binding seen on in 1/4” seam and pressed
Binding wrapped over the raw edges
Stitch in the well of the seam

I then topstitched 1/4” away from the seam. Next I’ll move on to the jacket back and the shoulder seams.

1 Comment

Filed under Jackets, Jalie Patterns